UNLOAD BULK MATERIALS WITH DIFFICULT-TO-FLOW PROPERTIES
ODS reclaimer EX 1 is designed to unload difficult-to-flow materials from flat bottom silo.
It is a very versatile equipment which fit with wide range of requirements.
The compact design is made to save space under the silo participating in reducing the total height of the process.
The transmission is electric powered with a reduced number of components to make maintenance low and very easy to handle.
The flow of material is out of contact with the driving system, which ensure no risk of product contamination and keep the access to the driving system from under the silo even if the silo is full.
Material free flow restriction is available with specific adaptation of the cover and inner part of the reclaimer.
It is advised to calculate metallic silo using Eurocodes EN 1991-4 – Actions on structures, Eurocodes 3 EN 1993-4-1 – Design of steel structures with special attention on the case of eccentric discharges EN 1991-4 (§5.2.4).
|Silo Ø||Ø 2m to Ø 4m|
|Flight max. Ø||Ø 220 mm|
|Discharge capacity min.||4 m3/h|
|Discharge capacity max.||30 m3/h|
|Motor power min.||5,5 kW|
|Motor power max.||9 kW|
- Wheat bran
- Soya meal
- Sunflower meal
- Cereal wastes
- Plastic wastes
- Wood chips
- Saw dust
- Wood bark
Dosing screw to easily regulate and adjust the flow when material is non homogeneous.
Atex Z20 inside silo / Not Atex outside silo